Meetings – looking for projects

Well it was a slightly quieter meeting today just Mike, Colin and myself. We had a look at Ubuntu 10.04 beta 1 which unfortunately would not run in Live mode on the PC we used ( It might be a bug as I haven’t tried it on my Core 2 Duo as yet) we also looked at the new Lubuntu beta 1 the first official community release of Ubuntu with the LXDE GUI looked good but crashed a couple of times in live mode, I may try installing them both in Virtual; Box to have a proper look and see if these are still issues.
We then had a look at Colin’s aging Think Pad laptop with a view to installing one of the very small distro’s but we were again up against the God’s as the CD drive would not allow it to boot from CD despite finally working out how to get into the strange bios set up and setting it up to boot from CD.
The rest of the session was discussing Linux from Scratch and the possibility of creating our own distro, Mike did point out that this was a big undertaking and without a programming background quite a difficult task.
Thanks to Colin for the Coffee and Les in his absence for the chocolate ūüôā
Well that will be it for a while as there is no meeting for the next 2 weeks and possibly 3 due to other commitments and the Easter break.

Meeting – USB booting

Quick update on what was covered at the last 2 meetings.
last Saturday we looked at repartitioning hard disks using the
Mandriva partitioning tool and took a quick look a shredding/wiping
data using DBAN.
The week before, Tony showed 2 distros booting from USB, (latests
Karmic Ubuntu, and latest Mint) Tony is a big Ubuntu fan! (isn’t that
right Tony?) I showed Moblin and Xpud booting from USB these are both
Kiosk style distros, and Xpud is of particular interest to me because
it boots in 15 seconds on an Acer aspire one netbook. The emphasis on
USB stick booting was at Colins request who unfortunately could not
make it at the last minute.

A beginners take on ARM programming

I have collected this material together as I have tried to figure out how to ‘get started’ with ARM.

ARM in this context means:-

A        Acorn or Advanced, depending on who you talk to.
R        RISC,  (Reduced Instruction Set Computing)
M       Machine 

Atomic: The Acorn Atom was my first computer, and the manual was called “Atomic theory and practice.” Acorn Atom picture

Acorn were the makers of the BBC micro which was widely used in schools in the UK in the ’80’s.
The BBC had an 8 bit 6502 microprocessor, and it is said that this processor which had a comparatively small instruction set was the inspiration for the design of the first ARM RISC(Reduced Instruction Set Computing) chip. ARM Рa brief history

Getting started will depend on what you are attempting to do or learn, and could perhaps be divided into two broad categories, hardware and software.

Software:
If you are interested in writing software/applications, then there is a multitude of options. Most Android ‘phones are ARM based, and Google have made it free and easy to develop and get applications into the Android market. So easy in fact, that several virus/trojan applications have appeared.

See our first attempt at an Android game  here :- Angry Beaks

The Apple iphone is ARM based, and Apple have also released a free development environment, although a licence is needed to put your application in the Apple appstore.

Microsoft intend to make Windows 8 available for ARM devices.

As you can see, there is no shortage of devices to develop applications for, but at the moment, Android is the cheapest and easiest to get started with.

Hardware:
There are also a multitude of development boards available if you want to get started with hardware.

Having only worked with assembler on the 6502 in the ’80’s, I thought ‘getting started’ with ARM would just be a case of learning the ARM assembler instructions and chip pinout as I had done with the 6502, but ¬†this is not the case.I soon discovered that there is a large number of ARM ¬†devices, and that the devices can have different operating states and modes.

So, where to start?
Update
Several years have passed, since I started this site, and I did not get started with ARM in the way I initially envisaged.
Basically, I was a beginner, starting again, and the ARM devices were more complicated than I wanted. Instead I found the AVR range of devices, specifically in the Arduino platform, designed with beginners in  mind.
Although not ARM, the Atmel AVR chips could be described as RISC, and the 8 bit version in the Arduino was just right as a starting point. The Arduino has a large community following, and the avrfreaks forum has answers to any AVR question you can think of. Did I mention that it is cheap too?

Blackpool LUG: From the mailing list Jan 2004

These posts from 2004 show the early days of the Blackpool LUG.

These are the first messages from the founders of Blackpool LUG:-

—————

Christopher Ganderton 70810 at blackpool.ac.uk
Fri Jan 23 13:07:51 GMT 2004

Previous message: [Blackpool] woop
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

So is there actually anyone subscribed to this list or what?

____________________
Linux user 338000 !!
I feel so unique ūüôā
____________________

——

Chris White chris at cswhite.co.uk
Tue Apr 6 15:49:54 BST 2004

Next message: [Blackpool] Test Posting
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Is there anybody out there?


Chris White

———-
Chris Ganderton chris at SyNSiTy.com
Sun Jul 11 14:52:09 BST 2004

Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

Just wondering if anyone had any info on what’s happeneing with the LUG?

has anyone spoken with chris recently about the LUG to get some indication if he’s going to get
chance to get a meeting together or something?

chris ganderton

——–

There doesn’t seem to have been much activity on the lug yet. There was talk
in the Preston group of going along to dnscon (www.dnscon.org) which is in
blackpool next weekend. Short notice i know, but perhaps an ideal
opportunity to for a first meeting to get things started?

Bob

———-
Hi everyone, my name is Mike Hewitt, and I run a
project in Blackpool which provides free computers
into the voluntary sector. We have a computer suite
consisting of ten computers installed with various
Linux distros, and broadband access through a
smoothwall firewall. I would like to offer use of the
suite to the Blackpool LUG free of charge. I have
tried the national LUG site, and the Blackpool LUG
site but have been unable to get a response. If the
Blackpool LUG exists, could some one please contact me?

=====
Best regards,
Mike Hewitt
Project leader
PC Recycler
A Fylde Coast CVS project
http://www.pcrecycler.co.uk

———————————
Following this post, the Blackpool LUG administrator contacted me, and after discussing various options,the Blackpool LUG administrator handed over ‘the reins’ to PC Recycler, who have been running the LUG since then.